
Epicor Kinetic for Job Shops and Machine Shops: Quoting, Scheduling, Job Costing and Finance
A practical look at quoting, scheduling and job costing in Kinetic, and the AP and AR work that decides whether each job’s margin is real.

Machine shops that turn a quote around within a day win more new business than shops that take longer: 51% versus 41%, according to Modern Machine Shop's 2026 Top Shops benchmarking. That is why owners judge an ERP on the quote first and the general ledger last.
Epicor Kinetic for job shops covers both ends, from estimating and scheduling to job costing. Yet the vendor invoices, accruals and customer payments behind every job still land on a finance team of two or three people. Below, we look at what Kinetic does well for high-mix, low-volume shops, where the finance gaps sit, and which AP and AR workflows to automate first.
Why job shops and machine shops evaluate Kinetic differently
A job shop sells capacity and know-how, not a catalogue. Each order carries its own routing, material and price, and the margin on it is decided twice: once when the estimate is built and again when actual labor, material and outside processing costs post against the job.
Epicor positions Kinetic for discrete, make-to-order, engineer-to-order, configure-to-order and mixed-mode production, and job shops sit squarely in the make-to-order camp. Aerospace and medical device manufacturers weigh Kinetic's manufacturing features mostly on compliance and traceability. A high-mix, low-volume shop asks four different questions:
Can we quote fast and accurately? Estimates must pull from past jobs, price several quantities and include subcontract costs.
Can we schedule a floor where every job competes for the same few machines?
Do we know what each job really earned? That needs estimated-versus-actual costing at job close, not a month later.
Can a small finance team keep up? Outside processing such as plating, heat treat and anodizing arrives as separate vendor invoices, and OEM customers often pay on long terms.
Kinetic answers the first three natively, because it ties scheduling, material planning, shop floor reporting and job costing into one system. The fourth is where most evaluations go quiet, and it is where a shop with one controller and one AP clerk feels the strain.
Quoting and estimating: where job shop margin is won or lost
Kinetic's Estimate and Quote Management module is built for the "same as last time, except" quote that job shops write every day. According to Epicor's estimating and quoting page, estimators can:
Drag components and operations in from an existing quote, bill of materials or previous job, then edit the copy.
Price several quantities of the same part in one estimate, with markups and special charges by cost category.
Send RFQs for material pricing to suppliers and pull the responses into the final estimate.
Flag a quote as won and push its lines straight to a sales order or job, so nothing is re-keyed.
Epicor's manufacturing catalog adds that estimates split material, subcontract, labor and burden costs, and each bucket is only as good as the data behind it.
The finance link most shops miss. A quote for a part that needs plating uses the last price paid to the plater. If that plater's invoices sit unprocessed for two weeks, or post with a lot charge nobody coded to the job, the next quote is built on a stale number. Fast, accurate AP is an input to quoting accuracy, not just a back-office cost.
Scheduling a high-mix shop floor in Kinetic
In a job shop, the bottleneck moves every week. A rush order for a five-axis part can push three other jobs off the same machine, and the schedule has to show that before the customer is promised a date.
Kinetic handles this in two layers:
Standard scheduling. Jobs are scheduled forward or backward against resource groups, calendars, setup and run times. Planners adjust jobs on a visual scheduling board, and Epicor's industrial machinery brochure describes dragging a job forward or back to relieve an overloaded work center.
Advanced Planning and Scheduling (APS). The add-on extends the engine with multiple-constraint scheduling, capability-based scheduling and real-time capable-to-promise, which helps when machines, tooling and qualified operators are all limited at once.
Most small shops start with standard scheduling and add APS once a specific constraint, such as a single grinder or a fixture shared across jobs, starts driving late deliveries. The difference between finite and infinite scheduling is worth settling early, because it decides whether promised dates reflect real machine time.
Scheduling also feeds finance. Labor reported on the shop floor is what posts actual labor and burden to each job, so loose time capture means a loose job cost report.
Job costing and outside processing: estimated versus actual

Job costing is the reason most machine shops buy an ERP like Kinetic. Every job accumulates material, labor, burden and subcontract cost, and Epicor's brochure highlights the ability to compare estimated versus actual costing on each one.
Outside processing is the cost bucket that most often goes wrong. In Kinetic, a subcontract operation sits on the job routing like any in-house step, and the flow usually runs:
The job reaches the subcontract operation, and a PO is raised to the supplier.
Parts go to the supplier, such as a heat treater or plater, and come back received against the PO and job.
The supplier's invoice arrives and must be matched to that PO line and receipt.
The matched cost posts to the job, and the job can close with a true margin.
Steps 1 and 2 happen in operations and are usually on time. Step 3 is where most outside processing problems start. Supplier invoices add lot charges, minimum fees or freight, quantities differ from the receipt, and the invoice lands in someone's inbox after the job has shipped.
Two things follow. The job closes with understated cost, so margin reports flatter work that may be unprofitable. And at month-end, received-but-not-invoiced services need an accrual, or the period's cost of goods sold is wrong. Inbound freight raises the same issue, because the landed cost of material stays incomplete until freight invoices, which often arrive weeks later, are posted.
The AP and AR workflows small shops still run by hand
Kinetic records payables and receivables correctly once the data is in. The manual work is getting it in: reading invoices and remittances, matching and coding supplier invoices, and applying cash and chasing customers.
The benchmarks show what is at stake. Ardent Partners' 2026 AP benchmarks put the average cost to process an invoice at $9.84, with an 18.4% exception rate, while Best-in-Class teams process invoices at 79% lower cost. On the receivables side, the 2026 Atradius Payment Practices Barometer for North America found late payment affects seven in ten companies, with overdue invoices averaging 23% of B2B receivables.
Workflow | What Kinetic gives you | What still runs by hand | What to automate |
Material and tooling invoices | POs, receipts and AP invoice entry with receipt matching | Keying invoice lines, matching to the right receipt | Extraction and three-way match against live open PO quantities |
Outside processing invoices | Subcontract operations, POs and receipts tied to the job | Reconciling lot charges, minimums and quantity variances | Line-level matching, with variances routed to the job owner |
Non-PO invoices (utilities, maintenance, inbound freight) | GL accounts and AP entry | Choosing the GL code for every line | GL coding predicted from history and validated before posting |
Received-not-invoiced services | Receipts and GL journals | Spreadsheet accruals at month-end | Accrual journals booked and reversed automatically |
Customer remittances | AR invoices and cash receipts | Reading remittances from emails, PDFs and portals | Remittance extraction and matching to open invoices |
Collections | AR aging reports | Prioritizing and emailing overdue customers | Customer-aware follow-ups, with disputes flagged early |
Automating job shop finance on Kinetic: Hyperbots integration and Persimmon case study
The earlier sections showed that a job shop's margin is set at the quote and proven at job close. Between the two sit dozens of supplier invoices, receipts, accruals and customer payments, and each one changes the job cost Kinetic reports. Hyperbots adds finance-trained Hyper Agents that handle that work inside Kinetic, with Epicor staying the system of record. For a job shop, the agents that matter most cover invoice processing, accruals and procurement on the payables side, and cash application and collections on the receivables side.
How the connector works inside Kinetic
The connector drives Kinetic through Epicor's own business objects, such as Erp.BO.APInvoiceSvc, Erp.BO.ReceiptSvc and Erp.BO.POSvc, rather than a flat-file import or generic middleware. Every invoice Hyperbots creates goes through the same group, line, receipt-matching, validation and posting steps as one keyed by hand, so nothing lands in Kinetic that Kinetic would not have accepted from a person.
Three design choices matter for a small shop:
Epicor stays the source of truth. Vendors, items, GL accounts, payment terms, POs and receipts are read from Kinetic automatically. Nobody uploads vendor lists or chart-of-accounts extracts into a second system.
Light on the production server. Each sync reads only the rows that changed since the last run, using Epicor's own row-revision number, and large reads are paged and paced. That matters when the same Kinetic server is also taking labor reports from the shop floor.
Custom fields are configuration, not code. Field mappings live in templates, so a job number held in a user-defined field, a second company or an unusual GL structure is set up without a development project. The same architecture runs the connectors for NetSuite, SAP Business One and other ERPs, so improvements made for one carry across to Epicor.
Mapped to the job shop problems in this guide
Job shop problem | What Hyperbots does in Kinetic | Effect on the job and the books |
A plater's invoice carries the service line plus a lot charge or freight | Receipted lines are matched by packing slip and pack line; the extra charges get the GL account Hyperbots predicted, all on one Epicor invoice | Outside processing cost reaches the job before it closes, not after |
Material arrives in partial shipments and is billed on split invoices | Each PO arrives with GL per line and the quantity and amount already invoiced; a new receipt refreshes its PO | Invoices match against what is still open, so nothing is paid twice or left unmatched |
Quotes use stale subcontract prices | Supplier invoices are processed as they arrive, and the Epicor invoice number is written back to Hyperbots once posted | Kinetic's last-paid cost is current when the next estimate is built |
Heat-treat lots are received but not billed at month-end | Accrual journals are booked and reversed through Epicor's own GL journal services | Cost of goods sold is right at close without a spreadsheet |
Buyers raise tooling and consumables requisitions | Approved requisitions become Epicor POs, with multi-release schedules and GL accounts validated in real time | Spend is committed against the right job or project before the invoice arrives |
OEM customers pay several invoices in one remittance, often short | The Cash Application Hyper Agent reads remittances from emails, PDFs, spreadsheets and bank statements and matches payments to open invoices, while the Collections Hyper Agent prioritizes overdue accounts | The AR aging shows real exposure, and disputes surface early |
Controls a two-person finance team can rely on
A lean AP team cannot afford to find half-built invoices in Kinetic at month-end. The connector is built so that never happens:
Pre-flight checks. An invoice without a matched vendor, an invoice number or at least one line fails in Hyperbots with a readable message, not as an obscure ERP error.
Epicor's own posting checks. Posting runs Kinetic's bank reference, vendor tax ID, deferred-line and pre-post group checks, then submits to the Epicor server agent. Hyperbots reports an invoice as posted only once Kinetic confirms it.
Clean rollback and corrections. If any step fails, the connector deletes the invoice group and invoices it created. A corrected invoice replaces the original instead of duplicating it.
Audit-ready records. The original invoice PDF is attached to the AP invoice header in Kinetic, so an auditor or customer quality auditor sees the source document beside the entry.
Errors people can act on. When Kinetic rejects a request, its own error message appears in Hyperbots, and write or posting failures trigger Slack or Teams alerts.
Integrations with ERPs Hyperbots already connects to, including Epicor, typically go live in 6 to 8 weeks.
Case study: How Persimmon Technology cut AP data entry by 80% on Epicor
Persimmon Technology runs Epicor on-premise. When VP of Finance Dave Sackett walked through the rollout, he described an AP team doing heavy manual keyboard entry, and earlier OCR tools that fell well short of what the team needed.
How it was set up. Hyperbots connected through Epicor's REST v2 endpoints, with Service Connect available for older builds. A lightweight agent on the Epicor app server opens an outbound HTTPS tunnel, so no inbound firewall changes were needed. Persimmon's custom fields were discovered during onboarding and treated as mapping targets, with no custom code.
How data moves. Company structure and chart of accounts sync weekly; suppliers, parts and GL codes daily; PO receipts and supplier invoices hourly. Writes for POs, invoices, journal entries, accruals and payments happen in real time.
How errors are caught. Each write is read back, and after posting the connector compares amount, currency, company and posting date. Failures get three automatic retries, then move to an exceptions queue with a Teams alert. New installs also keep a human review step before final submission. In Sackett's words, "Only a perfect match gets a green check."
What changed. Persimmon went live in 3 to 5 weeks, faster than the usual 6 to 8. AP data entry fell by 80%, and about 80% of invoices now process straight through. Beyond invoice processing, the team uses Hyper Agents for accruals, procurement, vendor management, payments and sales tax verification.
For a job shop running Kinetic on its own server, the same setup carries over directly. Receipts sync hourly, so an outside processing invoice can be matched the day the parts come back. Every posting is verified, so the estimated-versus-actual report at job close reflects what was really paid.
Is Epicor Kinetic ERP right for your machine shop?
Kinetic is a full manufacturing ERP, which is both its strength and its cost. The right answer depends less on headcount than on how complex your quoting, scheduling, job costing and finance work already is. Score your shop against the same four areas this guide has covered:
Area | Kinetic tends to pay off when | A lighter job shop system may be enough when |
Quoting | Most quotes reuse past jobs, need several quantity breaks and include outside processing | Parts are simple, quotes are one-off, and pricing is mostly material plus an hourly rate |
Scheduling | A few constrained machines or fixtures decide delivery dates, and rush jobs are common | A whiteboard and a weekly plan keep on-time delivery where customers want it |
Job costing | Multi-level assemblies, subcontract operations and burden rates need estimated-versus-actual by job | Costing a job as material plus labor hours is accurate enough to price the next one |
Finance and AR | You run more than one company or site, accrue month-end costs and chase OEM customers on long terms | One entity, few suppliers and customers who pay on time |
Ownership | Someone can own the system after go-live, internally or through an Epicor partner | Nobody has time to administer an ERP beyond day-to-day use |
If most of your answers sit in the middle column, Kinetic is likely the better long-term fit, especially for shops expecting to add machines, a second site or regulated work. If most sit on the right, the decision usually comes down to Kinetic's per-user licensing and services cost set against the other ERPs it competes with.
Either way, ask the Epicor partner to run your own scenarios in the demo rather than a standard script:
Build a quote from a past job with three quantity breaks and a plating operation.
Insert a rush job and show its impact on the schedule of your most constrained machine.
Close a job and show estimated versus actual cost, including outside processing.
Post a plater's invoice that combines a receipted service line with a lot charge.
Book a month-end accrual for a heat-treat lot received but not yet billed.
Apply a customer remittance that pays several invoices and short-pays one.
The first three test the shop floor. The last three show how much manual finance work Kinetic leaves your team, and which of it you will want to automate.
Making Epicor Kinetic job shop manufacturing pay off in finance
Epicor Kinetic gives job shops and machine shops the operations tools they need: quotes built from past jobs, capacity-aware schedules and job costs compared against the estimate. The margin those tools reveal is only as accurate as the payables and receivables data behind them.
That is why the finance workflows deserve the same scrutiny as the shop floor. Outside processing invoices matched to the right job, accruals booked before close and customer payments applied quickly decide whether a job's margin is real. That is the work Hyperbots takes off manufacturing finance teams running Kinetic, without changing Epicor's role as the system of record, and it is easiest to judge by running your own vendor invoices through it.
Frequently asked questions about Epicor Kinetic for job shops
Q1. Is Epicor Kinetic too big for a small job shop?
It can be for a shop with a few machines and simple routings, where a lighter package covers quoting and job tracking at lower cost. Kinetic earns its place once a shop needs estimated-versus-actual costing, subcontract operations and finance in one system.
Q2. Can Kinetic quote multiple quantities and include outside processing costs?
Yes. Estimates price several quantities of the same part and break cost into material, subcontract, labor and burden, with markups by cost category. Subcontract cost comes from supplier pricing, so keeping vendor invoices current in AP keeps those quotes accurate.
Q3. Do machine shops need Epicor APS, or is standard scheduling enough?
Standard scheduling handles forward and backward scheduling against resources and calendars, with drag-and-drop adjustment. APS adds multiple-constraint and capability-based scheduling plus capable-to-promise dates. Shops usually add it when a specific constraint, such as one critical machine or shared tooling, keeps causing late jobs.
Q4. How are outside processing invoices matched to jobs in Kinetic?
The subcontract operation creates a PO line tied to the job, and the returned parts are received against it. The supplier's invoice is then matched to that PO line and receipt, and the cost flows to the job. Hyperbots automates this match at line level, including invoices that mix receipted lines with freight or lot charges.
Q5. Which AP and AR tasks should a machine shop automate first?
Start with invoice capture and three-way matching, because they drive both job cost accuracy and the AP clerk's hours. Next, automate month-end accruals for received-but-not-invoiced services. On the AR side, cash application usually comes before collections, since unapplied cash makes the aging report unreliable.
Q6. How long does it take to add Hyperbots to Epicor Kinetic?
Integrations with ERPs Hyperbots already has connectors for, including Epicor, typically take 6 to 8 weeks. Persimmon Technology went live in 3 to 5 weeks without custom code. Pricing is volume-based, and custom fields or GL structures are handled as configuration rather than development.

